- GST No. 27AFNPK8304B1ZL
- Send SMS
- Send Email
Ambient Air Quality Monitoring Equipment
Leading Manufacturers, Exporters, Wholesaler, Retailer and Trader of Low Volume Sampler, Dust Samplers, Gaseous Samplers and Portable Real Time Air Quality Monitors from Mumbai.
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Trader, Distributor, Importer |
| Model Number | IPM-971L |
| Batteries Type | Rechargeable Li-Ion Batteries |
| Battery Life | 8 hour Run time |
| Option | 0-5LPM, 0 – 500mLPM or 0 – 200mLPM |
| Packaging Type | Box |
Preferred Buyer From
| Location | Worldwide |
The Model IPM-971 is the latest addition in the Instrumex brand of Air Samplers.
It is the most compact Air Sampler with customized flow range options.
It employs a rugged diaphragm pump which is capable of continuous operation without overheating. Specially designed for workplace & indoor environments, the IPM-971 has also proved its prowess in outdoor environments with medium to heavy dust density. A programmable timer allows automatic sampling and inbuilt charging circuit ensures continuous sampling in AC power while the battery is being charged. Provision to accommodate 2 mid get glass impingers (35ml. Capacity) for gaseous sampling.
Key Features:
- Simultaneous Sampling of Dust & Gases
- Rechargeable Li-Ion Batteries for 8 hour Run time
- Programmable Timer
- Option for 0-5LPM, 0 – 500mLPM or 0 – 200mLPM
- Ultra Silent operation
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Trader, Distributor, Importer |
| Details |  View |
| Feature | Durable, Fine Finished |
| Model | IPM-FDS 2510 |
| Dust Instruments Measurement | Pm2.5 & Pm10 |
| PM 2.5 Size Separator | Separate set of inlet assembly with EPA PM 2.5 WINS Impactor |
| Bar Press Sensor | Range 600 to 800 mm Hg. Resolution, 1 mm Hg |
| Leak Test | Internal & External Leak check feature for accurate sampling. |
Preferred Buyer From
| Location | Worldwide |
When it comes to innovation in Ambient Air Sampling technology, Instrumex has delivered yet again! The most common hassle faced by Consultants in order to comply with the CPCB norms for Ambient Air Sampling - was using two separate instruments for measurement of PM2.5 & PM10 Dust. Instrumex has found the solution to this problem - The Dual Channel Sampler for measurement of PM2.5 & PM10 dust concentrations in ambient air – Simultaneously!
The flow control module uses the proven technology used in Instrumex's IPM-FDS 2.5/10µ Fine dust Sampler that has enjoyed over 400 installations across India and abroad. The two channels in IPM-FDS-2510 are individually controlled by separate flow control element but integrated into a single controller module. Thereby giving precise microprocessor based flow control for two channels. Both the channels individually comply with Federal Reference Method of USEPA as described in 40 CFR Part-50 Appendix L for determination of Particulate Matter. It also confirms with the CPCB guidelines for Measurement of Ambient Air Pollutants.
Features
- Dual channel enables measurement of PM-10 & PM10 Simultaneously
- PM-10 Confirms to 40 CFR, Part 50 Appendix J of USEPA
- PM-2.5 Confirms to 40 CFR, Part 50 Appendix L of USEPA
- Microprocessor based Precision flow control for each channel
- Data Logging of all parameters for each channel
- Data Retrieval by USB and RS-232 ports
- Extremely portable with Foldable tripod stands and carry case
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Trader, Distributor, Importer |
| Model Number | IPM-110 |
| Power | 230V, AC |
| Calibrated Rotameter | 0-3LPM |
| Connecting tubes | Silicon |
| Packaging Type | Box |
Preferred Buyer From
| Location | Worldwide |
Standalone Gaseous Sampling Kit enables sampling of 4 gases at a time. Housed in a light weight powder coated aluminum assembly, this kit is extremely portable rain/dust proof. A digital timer for automatic start and stop provision ensures accurate sampling time.
The vacuum pump is a diaphragm type housed inside the cabinet with for exhaust fans. This ensures that the temperature inside the kit does not rise due to heat generated by the pump.The system works on 230V, AC power.
The Kit Consists Of Following :
- Calibrated Rotameter (0-3LPM)
- 4 way Acrylic manifold with flow adjustment through needle valve
- 4 impingers of 35ml. capacity
- Ice Tray & impinger stand
- Connecting tubes made up of Silicon.
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Trader, Distributor, Importer |
| Model | GD-102 |
| Detectable Gases/Parameters | All including/Volatile organic compounds |
| Electronics/Processor | Micro-Controller |
| Sensor Technology | All Gaseous Sensor |
| Display | Graphic LCD |
| Alarm | Audio/Visual |
| Range Resolution | %V/V/ % LEL/PPM |
| Accuracy | +/-2% & 0.5 for O2 |
| Response Time | Less than 15 Sec |
| Operating Temperature | 0 to 550 C |
| Sampling/Input | Diffusion/Suction |
| Output | RS-232, Data Logger |
| External Dimension | 225 x 106 x 40 mm approximately |
Preferred Buyer From
| Location | Worldwide |
It's simple automatic operation, continuous measurement and digital display of all or any selected gas and derived parameters make it a valuable aid for on-site instant analysis and follow-ups action. Its data logging and computer interface features can be used for further detailed analysis. It is a Compact, Rugged and Intelligent instrument for Ambient Monitoring, Pre-Entry Check, Quality Control Process Or Emission Gas Analysis, Fuel Combustion Optimization.
Key Features
- Automatic Operation
- Self Diagnostic Check
- Proven Sensor Technology
- Accommodate Up to 4 Sensors
- Continuous ,Stable Alphanumeric Display
- Diffusion or Suction Sampling
- Long Life Rechargeable Batteries
- Data Logging and RS232 Output Capability
- Intrinsically Safe
